JUNIPER JN0-335 EXAM LEARNING & VALID JN0-335 TEST COST

Juniper JN0-335 Exam Learning & Valid JN0-335 Test Cost

Juniper JN0-335 Exam Learning & Valid JN0-335 Test Cost

Blog Article

Tags: JN0-335 Exam Learning, Valid JN0-335 Test Cost, JN0-335 Reliable Test Materials, JN0-335 Exam Vce, Online JN0-335 Training

Our BraindumpsVCE devote themselves for years to develop the JN0-335 exam software to help more people who want to have a better development in IT field to pass JN0-335 exam. Although there are so many exam materials about JN0-335 exam, the JN0-335 exam software developed by our BraindumpsVCE professionals is the most reliable software. Practice has proved that almost all those who have used the software we provide have successfully passed the JN0-335 Exam. Many of them just use spare time preparing for JN0-335 Juniper exam, and they are surprised to pass the certificated exam.

Juniper JN0-335 (Security, Specialist (JNCIS-SEC)) certification exam is an essential certification for network security professionals who want to validate their skills and expertise in the field of network security. By passing JN0-335 exam, candidates demonstrate their proficiency in configuring and troubleshooting Juniper Networks security solutions, which can be applied in any organization. Security, Specialist (JNCIS-SEC) certification opens up a range of career prospects for successful candidates and is a prerequisite for many advanced Juniper Networks security certifications.

>> Juniper JN0-335 Exam Learning <<

Valid JN0-335 Test Cost | JN0-335 Reliable Test Materials

BraindumpsVCE Juniper JN0-335 Exam Study Guide can be a lighthouse in your career. Because it contains all JN0-335 exam information. Select BraindumpsVCE, it can help you to pass the exam. This is absolutely a wise decision. BraindumpsVCE is your helper, you can get double the result, only need to pay half the effort.

Juniper Security, Specialist (JNCIS-SEC) Sample Questions (Q77-Q82):

NEW QUESTION # 77
Click the Exhibit button.

Which two statements describe the output shown in the exhibit? (Choose two.)

  • A. Redundancy group 1 was administratively failed over.
  • B. Node 0 is controlling traffic for redundancy group 1.
  • C. Node 1 is controlling traffic for redundancy group 1.
  • D. Redundancy group 1 experienced an operational failure.

Answer: A,C

Explanation:
The output shown in the exhibit displays the status of a chassis cluster redundancy group (RG) on an SRX Series device. A chassis cluster RG is a collection of objects, such as interfaces or services, that fail over together from one node to another in case of a failure or manual intervention. A chassis cluster RG can be primary on one node and backup on another node at any given time. Two statements that describe the output shown in the exhibit are:
Redundancy group 1 was administratively failed over: The output shows that redundancy group 1 has "Manual failover" set to "Yes". This indicates that redundancy group 1 was manually switched from one node to another using the request chassis cluster failover redundancy-group command.
Node 1 is controlling traffic for redundancy group 1: The output shows that node 1 has "Status" set to "Primary" for redundancy group 1. This means that node 1 is active and controlling traffic for redundancy group 1.


NEW QUESTION # 78
Which two statements are correct about the cSRX? (Choose two.)

  • A. The cSRX supports firewall, NAT, IPS, and UTM services.
  • B. The cSRX has three default zones: trust, untrust, and management
  • C. The cSRX supports BGP, OSPF. and IS-IS routing services.
  • D. The cSRX only supports Layer 2 "bump-in-the-wire" deployments.

Answer: C,D

Explanation:
Explanation
The cSRX is a containerized version of the SRX Series firewall that provides advanced security services, including content security, AppSecure, and unified threat management (UTM) in the form of a container1. The cSRX supports easy, flexible, and highly scalable deployment options covering various customer use cases, including application protection, microsegmentation, or as an edge gateway for secure IoT deployments through a Docker container management solution2. The cSRX also supports SDN via Contrail Enterprise Multicloud, OpenContrail, and other third-party solutions2. The cSRX also integrates with other next-generation cloud orchestration tools such as Kubernetes3.
The cSRX supports firewall, NAT, IPS, and UTM services, so option A is incorrect1. The cSRX does not only support Layer 2 "bump-in-the-wire" deployments, but also Layer 3 deployments with routing protocols such as BGP, OSPF, and IS-IS, so option B is correct4. The cSRX supports BGP, OSPF, and IS-IS routing services, so option C is correct4. The cSRX does not have three default zones, but instead inherits the zones from the host SRX Series device, so option D is incorrect5. References:
1: cSRX Container Firewall | Juniper Networks US
2: cSRX Container Firewall Datasheet | Juniper Networks US
3: Understanding cSRX with Kubernetes - Juniper Networks
4: Extending Security to All Points of Connection: Containerized Security ...
5: cSRX Container Firewall | Juniper Networks UK&I


NEW QUESTION # 79
You just finished setting up your command-and-control (C&C) category with Juniper ATP Cloud.
You notice that all of the feeds have zero objects in them.
Which statement is correct in this scenario?

  • A. The security intelligence policy must be configured; on a unified security policy
  • B. Use the commit full command to start the download.
  • C. Set the maximum C&C entries within the Juniper ATP Cloud GUI.
  • D. No action is required, the feeds take a few minutes to download.

Answer: D

Explanation:
According to the Juniper Networks JNCIS-SEC Study Guide, when you set up your command- and- control (C&C) category with Juniper ATP Cloud, all of the feeds will initially have zero objects in them. This is normal, as it can take a few minutes for the feeds to download. No action is required in this scenario and you will notice the feeds start to populate with objects once the download is complete.


NEW QUESTION # 80
You are trying to create a security policy on your SRX Series device that permits HTTP traffic from your private 172 25.11.0/24 subnet to the Internet. You create a policy named permit-http between the trust and untrust zones that permits HTTP traffic. When you issue a commit command to apply the configuration changes, the commit fails with the error shown in the exhibit.
Which two actions would correct the error? (Choose two.)

  • A. Issue the rollback 1 command from the top of the configuration hierarchy and attempt the commit again.
  • B. Modify the security policy to use the built-in Junos-http applications.
  • C. Execute the Junos commit full command to override the error and apply the configuration.
  • D. Create a custom application named http at the [edit applications] hierarchy.

Answer: B,D

Explanation:
The error message indicates that the Junos-http application is not defined, so you need to either create a custom application or modify the security policy to use the built-in Junos-http application.
Doing either of these will allow you to successfully commit the configuration.


NEW QUESTION # 81
Exhibit

Referring to the exhibit, what do you determine about the status of the cluster.

  • A. Node 1 is down
  • B. There are no issues with the cluster.
  • C. Node 2 is down.
  • D. Both nodes determine that they are in a primary state.

Answer: C


NEW QUESTION # 82
......

Do you want to pass JN0-335 exam in one time? BraindumpsVCE exists for the purpose of fulfilling your will, and it will be your best choice because it can meet your needs. After you buy our JN0-335 Dumps, we promise you that we will offer free update service in one year. If you fail the exam, we also promise full refund.

Valid JN0-335 Test Cost: https://www.braindumpsvce.com/JN0-335_exam-dumps-torrent.html

Report this page